Why No One Talks About Estimates Anymore

      Comments Off on Why No One Talks About Estimates Anymore

Procedures to Use in Building Split Rail Fencing

Split rail fence is a very common method to fence homesteads and it is also among the earliest fencing methods. Those people who reside near the forests should know the importance of knowing the procedure for split rail fence installation. This is for the reason that the enclosure is mostly found in forested areas because it makes most of the materials in wooden area.

Despite the fact that this method is out of date, it is still appealing and attractive primarily to those who still keep with the tradition. This kind of method is inexpensive, simple and durable. The installation is functional and the tools required are basic such as wedge, a pair of gloves, helmet, and axe. Mostly, this method is really great because you can recycle inoperative timbers and construct a helpful and attractive enclosure.

The first thing you need to do when installing a split rail fence is to determine where you will install the fence. Be sure that the area is a safe one to excavate. Be sure that there is no water, gas, or power line under the area you are supposed to dig up holes. These line are extremely hazardous to anyone in the area.

After you finally decide you will build your fence, measure the perimeter of the area you want to enclose. To avoid confusion, make sure that you put a sign or mark on the boundary line. In order to do this, put a mark around the corners using ground stakes and make an outline by tying a guide from one corner to another. In this way, you can guarantee that you can have a clear guide and a well-stretched line.

With the guideline still there, place all your corner posts. Dig up a hole to place the split posts depth. To get the correct size of your hole, it should fit a third of the total length of the post. After that place the concrete to about 24 inches deep and leave it for 72 hours minimum. Make sure that you placed your posts with about 10 to 12 feet distance from each other. After you placed the post securely, make sure that the posts are positioned well and are in straight line.

Put a guide wire and be sure that the posts are placed vertically. The purpose putting a wire is to find out the precision of the line.
Next, measure the length from post to post in order to maintain a neat appearance. Using a wedge or axe, cut the post from the top to bottom.

Lastly, join each rail and split post using the hammer and drive nails. The place will not only keep the place beautiful within, but it will also serve as a strong protection from any destruction.

Finding Ways To Keep Up With Construction

5 Key Takeaways on the Road to Dominating Services